Mostrar el registro sencillo del ítem

dc.contributor.authorSalcedo Mendoza, Jairospa
dc.contributor.authorMercado B, José Lspa
dc.contributor.authorVanegas B., Miguelspa
dc.contributor.authorFernández Q., Alfredospa
dc.contributor.authorVertel Morinson, Melbaspa
dc.date.accessioned2020-01-09T16:06:08Zspa
dc.date.available2020-01-09T16:06:08Zspa
dc.date.issued2020-01spa
dc.identifier.citationSalcedo, J.; Mercado, J.; Vanegas, M.; Fernández A. y Vertel, M. (2014), Cinética de secado de la yuca (Manihot esculenta Crantz) variedad CORPOICA M-tai en función de la temperatura y de la velocidad de aire. ION, 27, 29-42. ISSN # 0120- 100Xspa
dc.identifier.issn0120-100Xspa
dc.identifier.urihttps://repositorio.unisucre.edu.co/handle/001/1005spa
dc.description14 p. Articulo Digitalspa
dc.description.abstractDrying cassava (Manihot esculenta Crantz) variety CORPOICA M-tai was performed in a dryer trays at laboratory scale. Samples of cassava with thickness of 0.2cm and 0.4cm diameter were placed on the dryer in direct contact with hot air under several operation conditions. The effect of temperature (35, 45 and 55°C) and air velocity (1.0, 2.0 and 3.0m/s) were studied on the drying time and effective diffusivity were assessed. The results showed that to the a temperature of 55°C and an air flow of 3.0m/s the drying time was of the 4.5h, reaching moisture 4.87% . Data obtained from the drying curves were adjusted to model Newton, Two exponential term, Wang and Singh, Modified Henderson and Pabis, and the Diffusion approximation. According to the results the mathematical model that best described the behavior of kinetic curves of drying was the diffusion Approximation model with a linear regression (0.958 ≤ R2 ≤ 0.993). The effective diffusivity (Df) value varied between 1.26 x 10-10 y 4.14. x 10-10m2/s and the activation energy (Ea) varied between 33.66KJ/mol to 16.16KJ/mol.eng
dc.description.abstractEl secado de yuca (Manihot esculenta Crantz) variedad CORPOICA M-tai, fue realizado en un secador de bandejas a escala de laboratorio. Muestras de yuca con espesor de 0,2cm y diámetro de 0,4cm fueron colocadas en el equipo en contacto directo con aire caliente, bajo distintas condiciones de operación. Se evaluó el efecto de la temperatura (35, 45 y 55°C) y la velocidad del aire (1,0, 2,0 y 3,0m/s) sobre el tiempo de secado y la difusividad efectiva. Los resultados obtenidos indicaron que a una temperatura y flujo de aire de 55°C y 3,0 m/s respectivamente, el tiempo de secado fue de 4,5h, alcanzándose una humedad de 4,87%. Los datos derivados de las curvas de secado fueron ajustados a los modelos de Newton, el de Dos términos exponencial, el de Wang y Singh, el de Henderson y Pabis modificado y el Difusión aproximal. De acuerdo con los resultados el modelo matemático que describió mejor el comportamiento cinético de las curvas de secado fue el modelo Difusión aproximal con una regresión lineal (0,958 ≤ R2 ≤ 0,993). La difusividad efectiva (Df) de la yuca varió entre 1,26 x 10-10 y 4,14 x 10-10m2/s y la energía de activación (Ea) varió entre 33,66 a 16,16KJ /mol.spa
dc.format.mimetypeapplication/pdfspa
dc.language.isospaspa
dc.relation.ispartofseriesRevista Ion/ Vol 27/ nº 2;spa
dc.rightsRevista Ion, 2014spa
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/4.0/spa
dc.sourcehttp://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S0120-100X2014000200004spa
dc.titleCinética de secado de la yuca (Manihot esculenta Crantz) variedad CORPOICA M-tai en función de la temperatura y de la velocidad de airespa
dc.title.alternativeDrying kinetics of cassava (Manihot esculenta Crantz) variety CORPOICA M-tai depending on the temperature and air velocityspa
dc.typeArtículo de revistaspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.type.driverinfo:eu-repo/semantics/bookPartspa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa
dc.type.coarhttp://purl.org/coar/resource_type/c_3248spa
dc.relation.references[1] Ertekin C, Yaldiz O. Draying of eggplant and selection of a suitable thin layer drying model. J. of foodengineering. 2005;25:349-59. [2] Cardozo A, De Asis F. Comparación de los modelos matemáticos de calor isotérmicos de desorción en pulpa de Guayaba. Revista Brasileira de almacenamiento. 2004;29(1):28- 34. [3] Vega A, Andres A, Fito P. Modelado de la cinética de secado del pimiento rojo (Capsicumannuum L. cv Lamuyo). Información tecnológica. 2005;16:3-11. [4] Falade K, OlurinT, Ike E, Aworh O. Effec of pretreatment and temperature on air-Drying of Discorea alata and Discorea rotundata slices. Journal of food engineering. 2007;80(4):1002- 20. [5] Krokida MK, Karathanos V, Maroulis Z, Marinos- Kouris D. Drying kinetics of some vegetables. Journal of Food Engineering. 2003;59(4):391- 403. [6] Brennan JC, Butters JR, Cowrell RL, Lilly AE. Las Operaciones de la Ingeniería de los alimentos. España: Editorial Acribia; 1980. [7] Giner SA, Mascheroni R, Nellist ME. Crossflow drying of wheat. A simulation program with a diffusion-based deep-bed model and a kinetic equation for viability loss estimations. Drying Technology. 1996;14(7-8):1625–71. [8] Herman E, Rodríguez GC, García MA. Mathematical modelling for fixed-bed drying considering heat and mass transfer and interfacial phenomena. Drying Technology. 2001;9(1):137–54. [9] Kiranoudis CT. Design of batch grape dryers. Drying Technology. 1988;16(1-2):141–62. [10] Ratti C, Mujumdar AS. Simulation of packed bed drying of foodstuffs with airflow reversal. Journal of Food Engineering. 1995;26(3):259– 71. [11] Trelea IC, Courtois F, Trystram G. Dynamic models for drying and wet-milling quality degradation of corn using neural networks. Drying Technology. 1997;15(3-4):1095–102. [12] Montes EJ, Torres R, Andrade R, Pérez O, Marimon J. Modelado de la cinética de secado de ñame (dioscorea rotundata) en capa delgada. Revista Ingeniería e Investigación. 2008;28(2):45-52. [13] Cunniff P. Official methods of analysis of AOAC International. 19th ed. Gaithersburg, Maryland, U.S.A: Association of Official Analytical Chemists;1997. [14] Rossi J, Roa G. Secagem e armazanamento de produtos agropecuários com uso de energía solar e ar natural. Sao Paulo: ACIESP; 1980. [15] Ihaka R, Gentleman R. A languaje and enviroment for statistical computing. Viena: R Foundatiom for statiscal computing; 2008. [16] Geankoplis CJ. Procesos de transporte y operaciones unitarias. Tercera Edición. México. Compañía Editorial Continental S.A: tercera edición; 1988. [17] Ocampo, A. Modelo cinético del secado de la pulpa de mango. Revista Escuela de Ingeniería de Antioquia EIA. 2006:5;193-28. [18] Carranza J, Sánchez M. Cinética de secado de musa paradisiaca l. “plátano” y manihot esculenta Crantz “yuca”. Revista Amazónica de Investigación Alimentaría. Facultad de Ingeniería en Industrias Alimentarías de la UNAP. 2002;2(1):15-25. [19] Akpinar EK, Bicer Y. Mathematical modelling and experimental study on thin layer drying of strawberry. International Journal of Food Engineering. 2006;2(1):1556-3758. [20] Mohammadi A, Rafiee S, Keyhame A, Emam- Djomeh Z. Estimation of Thin-layer Drying Characteristics of Kiwifruit (cv. Hayward) with Use of Page’s Model. J. Agric. & Environ. Sci. 2008;3(5):802-5. [21] Akpinar E, Bicer Y, Yildis C. Thin layer drying of red pepper. Journal of Food Engineering. 2003;59(1):99–104. [22] Madamba PS, Robert H, Buckle K. The thinlayer drying characteristics of garlic slices. Journal of Food Engineering. 1996;29(1):75-97. [23] Zogzas NP, Maroulis ZB, Marinos-Kouris D. Moisture diffusivity data compilation in foods tuffs. Drying Technology. 1996;14(10):2225-53. [24] Doymaz, I. Pretreatment effect on sun drying of mulberry Fruits (Morusalba L). Journal of food engineering. 2004;65(2):205-209. [25] Rosello C, Simal S, San Juan N. Nonostropic mass Transfer model for green Bean Drying. Journal of Agricultural and food Chemistry. 1997;6(1):69-76. [26] Perez C, Vizcarra Y. Modelamiento del Proceso de Secado de Pimienta Gorda (Pimenta dioica L. Merril) en Lecho Fluidizado (sitio de internet). Universidad Autónoma del Estado de México, Dpto. de Ingeniería Química, Facultad de Química. Disponible en htpp/ www.respyn. uanl.mx/especiales/2008/ee-08-2008/.../A010. Acceso enero 2013.spa
dc.rights.creativecommonsAtribución-NoComercial-CompartirIgual 4.0 Internacional (CC BY-NC-SA 4.0)spa
dc.subject.proposalyuca, curvas de secado, tiempo de secado, modelos cinéticos, difusividad efectivaspa
dc.type.contentTextspa
dc.type.redcolhttps://purl.org/redcol/resource_type/CAP_LIBspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Revista Ion, 2014
Excepto si se señala otra cosa, la licencia del ítem se describe como Revista Ion, 2014